广州洗衣凝珠设备厂家 pvA水溶膜设备 产量大 耗能低 以勒

作为“*三代洗衣技术”，洗衣凝珠不仅在方便程度上远**洗衣液和洗衣粉，从清洁效力方面，也存在一定的优势，其有效清洁成分普遍**国家标准洗衣液配方，清洁力度较强，相比过去的传统洗衣产品，还将多重成分融合为一。
PVA水溶膜凝珠自动包装机是一台平板式液体**自动吸塑灌装包装设备，是专门针对凝珠洗衣液单独定量包装而开发的一款包装机，具有良好的薄膜和液体制剂适应性。

产品优势
>>投资性价比高，设备交期短，薄膜可小批量快速交付。
>>稳定的生产性能，设备与薄膜高度匹配。
>>良好的产品性能，薄膜与包装内容物精确匹配。
>>完善的售后服务和培训，一对一包装工艺与技术培训
凝珠自动包装机是一台小剂量液体**自动罐装设备，是专门针对洗衣液凝珠单独定量包装而开发的一款包装机，具有良好的薄膜和液体制剂适应性。设备采用蠕动泵罐装，可靠性高，计量误差小；传动采用伺服电机，生产的连贯性、节拍柔性均可精确调节。模具运用三维软件优化设计，CNC统一加工，保证模具型腔的合理性、均匀性、一致性。热封结构，密封可靠、稳定。成品采用分体式刀具热切模式，一次性切割成型，边缘光滑整洁。整机采用PLC控制，温度、速度灯参数通过人机界面触摸屏进行设置，自动化程度高。设备配件均采用国际**，寿命期长。
The automatic bead packaging machine is a speciai automatic canning equpment for smail-dose liquid.It is specially developed for the packaging of laundry liquid beads. It has a good adaptability for film and liquid preparation. The device adopts peristaltic pump canning, high reliability and small dose error; the transmission adopts private service motot and the consistency of production and the fiexibility of the beat can be precisely adjusted. The mold is optimized by 3D software and the CNC is processed uniformly to enture the rationality, uniformity and consistency of the mold cavity. Heat sealing structure is reliable and stable. The finished product adopts the split cutter hot cutting mode, which is cut and formed at one time,and the edges are smooth and tidy The whole machine adopts PLC control and the parameters such as temperature and speed are set through the human-machine interface touch screen, and the degree of automation is high. The equipment accessories are all international famous brands and have a long service life.
设备型号描述：
技术参数
电源：3P=N=PE
功率：8.5KW
气压：0.6-0.8Mpa
控制方式：PLC+触摸屏/-键操作
生产能力：5-50g 规格30-168 粒/分钟
PVA 水溶膜宽度：400-410MM
整机尺寸：4000 长×900 宽×1950 高（MM)
操作温度：25-28°C
恒湿：55-70%
1. 设备采用平板式灌封，传动采用伺服电机，生产的连贯性、节拍柔性，均可以精准调节。
2. 灌装系统采用高精密计量阀单独计量，灌装系统耐腐蚀、可靠性高。
3. 模具运用三维软件优化设计，CNC统一制造，保证了模具型腔的合理性、均匀性、一致性。
4. 热封结构设计，可以有效封合锁边，保证密封性。
成品分切采用一体式分切设计，横切、纵切均为随动机构，与滚轴速度保持一致，生产连贯性好。
6. 整机采用PLC控制，温度、压力、速度等参数通过人机界面触摸屏进行设置，自动化程度高。
7. 设备配件均采用国际，寿命期长。
洗衣凝珠包装机生产的产品：　洗衣凝珠是一种创新性的洗衣产品，因外形似珠子而得名，在洗衣时放入一颗，可以迅速融化于水中，起到洗涤、清洁的作用。洗衣凝珠在网上卖得十分*，成为了很多家庭的选择。


问：洗衣凝珠包装机开机步骤-说明书
答：一、操作面板设置
I. operation panel setting
1开启电源开关(1),电源指示灯亮(2)
1、Turn on the power switch (1), and the power indicator is on.
2、开启起源(各气缸复位原点)
2、Open origin (reset origin of each cylinder)
3.把封口加热开关(6)拨至"ON*位置(温度仪参考设定温度在135-1650C,具体温度根据水溶膜材质而定)
3、Heat sealing switch (6) set to "ON" position (reference temperature instrument set temperature between 135-165 "C, the specific temperature according to the material of water soluble filim and decide)
4、切口加热开关(7)拨至“ON*位置(温度仪参考设定温度在170-200C具体根据实际效果而定)
4、Incision heating switch (7) set to "ON" position (reference temperature instrument set temperature between 170-200 C, the specific temperature according to the actual effect and decide)
5、把卷筒水溶膜套装在上、下放溶膜轴上，然后用****住放膜轴气门芯充气直至水溶膜固定为止.拉出下膜布铺盖在模具上至封口板处,再拉出下膜布铺盖在模具上至封口板位置处.
5、Put the water-soluble film package on the upper and the lower water-soluble film axis, and then inflate the valve core of the film-releasing axis with the air *** until the water-soluble film is fixed. Pull out the lower film cloth to cover the mold to the sealing plate, and then pull out the upper film cloth to cover the mold to the sealing plate.
6、在操作面板上按原定复位按钮(13),此时输送链条带动模具自动归原点复位，直至结束。
6、Press the original reset button (13) on the operation panel, and the conveyor chain will drive the mold to automatically return to the original point and reset until the end.
7、在操作面板上把“自动/手动"开关(2)拨至自动挡.
7、Turn the "automatic/manual" switch (2) on the operation panel to the automatic gear.
8、添加洗衣液到储液箱中，注意不能**临界位置。
8、Add laundry detergent to the liquid storage tank, and pay attention not to exceed the critical position.
9、将操作面板上的真空泵开关(12)拨至*ON* 位置.
9、Turn the vacuum pump switch (12) on the operating panel to“ON"position. :
10、把废膜套装上收废膜轴上，用****住气阊芯充气，致收膜套固定, 然后将废膜引至收膜轴上，把“收膜电机”开关(10)拨至“0N"位。
10、Put the waste film on the waste film shaft, with inflatable air *** to resist valve core, to collect film set, then scrap film to film on the shaft, the "motor closed membrane switch (10) to" ON" position.
11、确认封口和切刀温度达到设定值后，按启动按钮(9),此时设备进入运行状态.
11、 After confirming that the temperature of sealing and cutting tool reaches the set value, press the start button (9) and the equipment will enter the running state.